Canon imageRUNNER ADVANCE 4551i Service Manual page 706

COPIER > FUNCTION > INSTALL
NFC-USE 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
BLE-USE 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
■ CCD
COPIER > FUNCTION > CCD
DF-WLVL1 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
ON/OFF of NFC option
To set whether to enable the installed NFC option.
Set 1 when using the NFC option. [Use NFC Card Emulation] is displayed in [Settings/Registration].
When installing the NFC option
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Management Settings> Device Management> Use NFC Card Emulation
ON/OFF of BLE module option
To set whether to enable the installed BLE module option.
Set 1 when using the BLE module option. The BLE setting screen is displayed in [Settings/
Registration].
When installing the BLE module option
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not set 1 when the BLE module option is not installed.
0 to 1
0: OFF, 1: ON
0
White level adj in book mode: color
To adjust the white level for copyboard scanning automatically by setting the paper which is usually
used by the user on the Copyboard Glass.
- When replacing the Copyboard Glass
- When replacing the Scanner Unit
- When replacing the Reader Controller PCB/clearing RAM data
1) Set a paper on the Copyboard Glass.
2) Select the item, and then press OK key.
Be sure to execute DF-WLVL2 in a row.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> CCD> DF-WLVL2
693
8. Service Mode