Canon imageRUNNER ADVANCE 4551i Service Manual page 805

COPIER > OPTION > USER
JA-WIFI 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
■ ACC
COPIER > OPTION > ACC
COIN 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
Supplement/Memo
Setting of SAM Wi-Fi direct print
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow Wi-Fi direct print when iW SAM is enabled.
Wi-Fi direct print cannot be used when iW SAM is enabled. However, when 1 is set, it can be used.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of charge management
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set charging management method.
At installation of Coin Manager
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Following items are automatically specified when changing the value to 3 (from 0 to 2). The change
will not be returned even if changing back the value to 0 to 2 (from 3) once the mode has been
changed.
- COPIER> OPTION> USER> CONTROL=1
- COPIER> OPTION> NETWORK> DA-CNCT=1
- COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX=0
- Function Settings > Send > E-Mail/I-Fax Settings > Communication Settings > SMTP Receive,
POP=OFF
- Preferences> Network > TCP/IP Settings > DNS Settings > FTP Print Settings > Use FTP
Printing=OFF
- Preferences> Network > TCP/IP Settings > DNS Settings > IPP Print Settings > Use IPP
Printing=ON
0 to 7
0: No charge
1: Charge with Coin Manager
2: Charge with remote counter
3: Charge with DA (only in Japan)
4: Charge with this machine itself
5: Not used
6: External charge mode 6
7: External charge mode 7
0
COPIER> OPTION> USER> CONTROL
COPIER> OPTION> FNC-SW> DA-CNCT
COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX
COPIER> OPTION> ACC> PDL-THR
Function Settings> Send> E-Mail/I-Fax Settings> Communication Settings
Preferences> Network> TCP/IP Settings> DNS Settings> FTP Print Settings, IPP Print Settings
Control card can be used with "No charge".
DA: Digital Accessory
792
8. Service Mode