Canon imageRUNNER ADVANCE 4551i Service Manual page 879

OPTION
SORTER > OPTION
MD-SPRTN 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
BUFF-SW 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
PUCH-SW 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Supplement/Memo
Restricted oprtn at Fin error: Fin-J1/Y1
To set whether to stop the machine when an error occurs at Finisher.
The result set in [Limited Functions Mode] in [Settings/Registration] is displayed.
Set 0 when canceling restriction on operations.
When switching whether to restrict operations for each function, make the setting in [Limited
Functions Mode].
When canceling restriction on operations of the finisher
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not set any value other than 0.
0: Without restriction
0
Management Settings> Device Management> Limited Functions Mode
Set of fin buffer opertn: Fin-Y1
To set ON/OFF of buffer operation in the Finisher.
When 1 is set, the buffer operation is not performed for all modes. The alignment performance is
improved, but the productivity decreases.
When the misalignment of the buffered paper stack occurs on the processing tray
Enter the setting value and press OK.
When the buffer operation is set to OFF, productivity is decreased.
0 to 2
0: ON, 1: OFF, 2: Not used
0
Hi-prdctvty/accurcy punch mod: Fin-J1/Y1
To switch the high-productivity punch mode or high-accuracy punch mode of Finisher.
When switching the high-productivity punch mode or high-accuracy punch mode
Select the item, and then press OK key.
0 to 1
0: high-accuracy, 1: high-productivity
0
Adjustment/Maintenance> Adjust Action> Switch Finisher Puncher Mode
The settings of this service mode and the "Switch Finisher Puncher Mode" of the "Settings/
Registration" change at the same time.
866
8. Service Mode