Canon imageRUNNER ADVANCE 4551i Service Manual page 742

COPIER > OPTION > FNC-SW
DCONRTRY
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Supplement/Memo
FL-START
■ DSPLY-SW
COPIER > OPTION > DSPLY-SW
UI-COPY
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
UI-BOX
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
2 Set of retry at DCON comctn error occur
To set whether to perform retry processing when communication error occurs between the Main
Controller and the DC Controller.
Set 1 to 3 when E733 occurs. Communication error may be avoided by retry. (It is effective
especially when E733-0001/0002/0005 occurs.)
If communication error occurs during finishing job while 3 is set, duplicated pages may be output
due to retry. In such case, set 0 to 2. Since retry is not performed during finishing job, duplication
of pages does not occur, but E733 occurs.
When E733 occurs
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When 3 is set, duplication of pages may occur during finishing job.
0 to 3
0: OFF
1: OFF during job, ON in other states
2: OFF during finishing job, ON in other states
3: ON
1
Finishing job: Job that 2-sided print, binding and/or collate set in "Finishing" of the printer driver.
2 [For customization]
2 Display/hide of copy screen
To set whether to display or hide the copy function.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
1
2 Display/hide of Inbox screen
To set whether to display the Inbox function.
The setting value1 and 2 of this item are linked with the values (ON and OFF) of Store Location
Display Settings> Main Box in Settings/Registration menu respectively. The setting is reflected
after turning OFF/ON the power.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: No Inbox function (Storing is not available even with PDL to Inbox.)
1: Inbox function is active
2: Inbox function is active (with limitation; Storing is available with PDL to Inbox despite no display
on the Control Panel/remote UI)
1
Preferences> Display Settings> Store Location Display Settings> Mail Box
729
8. Service Mode