Canon imageRUNNER ADVANCE 4551i Service Manual page 241

2. Remove the Feeder Cover [1].
• 1 Screw [2]
• 1 Positioning Pin [3]
CAUTION:
Be careful not to hang the cables while putting the rear cables through the hole at the plate.
■ Removing the Inner Cover
● Preparation
1. Remove the Pickup roller
● Procedure
1. Remove the Inner Cover [1].
• 1 Screw [2]
• 2 Claws [3]
1x
2x
■ Removing the Different Width Sensor PCB (PCB3)
● Preparation
1. Remove the Inner cover."Removing the Inner Cover" on page 228
1x
[3]
[2]
assembly."Removing the Pickup Roller Assembly" on page 218
[3]
[1]
[1]
228
4. Disassembly/Assembly
[3]
[2]