Canon imageRUNNER ADVANCE 4551i Service Manual page 793

COPIER > OPTION > USER
COUNTER7 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
COUNTER8 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
2C-CT-SW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-FUNC 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
JA-JOB 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Setting of software counter 7
To set counter type for software counter 7 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
0
Setting of software counter 8
To set counter type for software counter 8 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
0
Set of color counter at 2-color mode
To set whether to use the single color counter or full color counter for count-up in 2-color mode.
When supporting 2-color mode
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Single color counter, 1: Full color counter
It differs according to the location.
Display of job archive function ON/OFF
To display ON/OFF of job archive function.
Make the setting with the MEAP program which supports job archiving.
When using the job archive function
N/A (Display only)
Setting cannot be made with this item.
0 to 1
0: OFF, 1: ON
0
Display of job archive target job
To display the job type subject to job archive.
When the job archive function is ON, archive operation is executed when executing the target job.
Make the setting with the MEAP program which supports job archiving.
When using the job archive function
N/A (Display only)
Setting cannot be made with this item.
0: N/A, 3: Limited to FAX/IFAX, 0xFFFFFFFF: All jobs
0
COPIER> OPTION> USER> JA-FUNC
780
8. Service Mode