Canon imageRUNNER ADVANCE 4551i Service Manual page 831

COPIER > TEST > PG
DENS-K 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PG-PICK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
2-SIDE 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PG-QTY 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
FINISH 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Adj of Bk-color density at test print
To adjust Bk color density when performing test print (TYPE=5).
As the greater value is set, the image gets darker.
At test print (TYPE=5)
Enter the setting value, and then press OK key.
1 to 25
1
Setting of test print Pickup Cassette
To set the Pickup Cassette for test print output.
- At trouble analysis
- At test print output
Select the item, and then press OK key.
1 to 8
1: Cassette 1, 2: Cassette 2, 3: Cassette 3, 4: Cassette 4, 5: Multi-purpose Tray, 6: Paper Deck,
Unit, 7 to 8: Not used
Setting of PG 2-sided mode
To set 1-sided/2-sided print for PG output.
At trouble analysis
Enter the setting value, and then press OK key.
0 to 1
0: 1-sided, 1: 2-sided
0
Setting of PG output quantity
To set the number of sheets for PG output.
At trouble analysis
Enter the setting value, and then press OK key.
1 to 999
sheet
1
1
Accessory processing function test print
To execute the test print relating to accessory processing function.
When checking operation of accessory processing function
1) Enter the number of sheets for PG-QTY, and then press OK key.
2) Enter the setting value, and then press OK key.
3) Press Start button.
The machine outputs a test print.
0 to 99
0: N/A
1: Staple (Finisher, front)
2: Staple (Finisher, 2 points)
3: Staple (Finisher, rear)
8: Saddle fold (Finisher)
11: Punch (Inner Puncher)
Any values other than those mentioned above: Not used
0
COPIER> TEST> PG> PG-QTY
818
8. Service Mode