Canon imageRUNNER ADVANCE 4551i Service Manual page 952

Hide thumbs Also See for imageRUNNER ADVANCE 4551i:

Table of Contents

10. Remove the harness from the wire saddles as shown

in the figure, and then connect it to J1102 of the

• 2 Wire Saddles

• 1 Connector

11. Connect the connector of the Heater DC Harness to

J320 of the DC Controller PCB, and then connect the

other end of the connector to J1103 of the Heater

• 2 Connectors

• 4 Wire Saddles

12. Attach the connector of the longest branch of the

Heater AC Harness to the Cassette Relay Bracket.

13. Install the Heater AC Harness as shown in the figure.

• 3 Wire Saddles

9. Installation

Troubleshooting