Canon imageRUNNER ADVANCE 4551i Service Manual page 906

16.
17.
2x
18.
19.
Connect the power plug of the host machine to the
power outlet.
20.
Turn the main power switch ON.
Turning ON the Main Power
1. Connect the power plug of the host machine to the
power outlet.
2. Remove the protection sheet on the control panel.
3. Open the switch cover and turn ON the main power
switch.
NOTE:
1. Supplying the toner and initialization of the
Developing Assembly and the Drum are
automatically performed.
2. When supplying the toner is completed, the operation
stops (Approx. 10minutes).
NOTE:
Turning OFF the Main Power Switch
1. Open the switch cover and turn OFF the main power
switch.
2. Be sure that the display on the Control Panel and the
Main Power Lamp are both turned OFF, and then
disconnect the power plug.
893
9. Installation