Canon imageRUNNER ADVANCE 4551i Service Manual page 803

COPIER > OPTION > USER
SJ-CLMSK 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
PRTDP-SW 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PDFD-MSW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SFT-OUT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
ON/OFF secured job stop button display
To set whether to display the button to stop a secured job.
When 0 is set, the stop button is displayed.
When COIN is set to 6 or 7 (charge mode: Type-C), set 1. Since the stop button is not displayed,
the secured job cannot be stopped.
When prohibiting to stop the secured job in charge mode Type-C
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF (Display), 1: ON (Hide)
0
COPIER> OPTION> ACC> COIN
Set delivery side for 1-page job:2-sided
To set whether to deliver paper face-up or face-down when printing only 1 page although 2-sided
print is set.
When 0 is set, paper is delivered face-down like 1-sided job. (Paper does not pass through the
Duplex Path.)
When 1 is set, paper is delivered face-up via the Duplex Path. Paper feed distance becomes longer
so productivity is decreased.
When changing the delivery side of 1-page print although 2-sided print is set
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Face-down delivery, 1: Face-up delivery
0
Set output paper size: direct print PDF
To set output paper size at direct print PDF.
Usually, the region defined by MediaBox is output. However, in some cases, the region defined
(trimmed) by CropBox is judged as output paper size depending on PDF file.
Set 1 when output result differs from what is defined at direct print PDF.
When preferring to output a PDF file with paper which size is defined by CropBox while the sizes
of MediaBox and CropBox are different
Enter the setting value, and then press OK key.
0 to 1
0: MediaBox (Normal), 1: CropBox
0
Setting of offset priority delivery
To set whether to deliver a job where offset and collate/offset group is set to the delivery destination
with offset function.
When 0 is set, a job is delivered to the delivery destination set in Settings/Registration menu even
though the offset function is not available.
When 1 is set, a job is delivered to the delivery destination with offset function even though a
delivery destination without offset function is set in Settings/Registration menu.
When preferring to deliver a job to the delivery destination with offset function
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Based on Output Tray Settings, 1: Priority on job settings (deliver to a delivery destination where
offset is possible)
1
Function Settings> Common> Paper Output Settings> Output Tray Settings
790
8. Service Mode