Canon imageRUNNER ADVANCE 4551i Service Manual page 796

COPIER > OPTION > USER
FREE-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
TNRB-SW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SCALLCMP 1
USBH-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
USBM-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Display/hide of charge disable screen
To set whether to display or hide the Use Charge Management screen for switching between
charge and no charge.
The hardware switch for switching charge/no charge in the Coin Manager enables the mode in
which all the services are available for free (store manager mode) by temporarily releasing the
charging system.
Even without the hardware switch, the mode can be switched with the software switch when it is
set to display the Use Charge Management screen in Settings/Registration.
When enabling all the services to be provided for free by temporarily releasing the charging system
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
0
Management Settings> Charge Management> Use Charge Management
Set of Toner Container counter display
To set whether to display the Toner Container counter on the Counter Check screen.
When not showing the screen to users
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Hide, 1: Display (Toner Container counter 70s), 2: Not used, 3: Display (Toner Container counter
70s and 180s)
It differs according to the location.
[Not used]
Display/hide of "Use USB Host"
To set whether to display "Preferences > External Interface > USB Settings > Use USB Host".
By selecting "1: Display", whether to use USB host on USB Settings screen can be selected.
When switching to display or hide "Use USB Host" on USB Settings screen
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
0
Preferences> External Interface> USB Settings> Use USB Host
ON/OFF USB ex-mem device MEAP driver use
To set whether to display "Use MEAP Driver for USB External Device" in Settings/Registration
menu.
When 0 is set, the item is not displayed so that the user administrator cannot change the setting.
When not allowing the user administrator to select whether to use the MEAP driver
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When setting 0, be sure to make the setting after the specified setting is completed.
0 to 1
0: OFF, 1: ON
1
Preferences> External Interface> USB Settings> Use MEAP Driver for USB External Device
783
8. Service Mode