Canon imageRUNNER ADVANCE 4551i Service Manual page 777

■ CUSTOM
COPIER > OPTION > CUSTOM
SC-L-CNT 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
SCANTYPE 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PDLEVCT1 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ABK-TOOL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
Set large paper jdgmt reference at scan
To set the judgment reference of the scan counter as to which to use B4 or LTR to determine large
size.
The threshold is determined by the combination with the setting of B4-L-CNT.
SC-L-CNT=0, B4-L-CNT=0: paper exceeding B4 is determined as large size, paper with B4 or
smaller is determined as small size.
SC-L-CNT=0, B4-L-CNT=1: paper with B4 or larger is determined as large size, paper smaller than
B4 is determined as small size.
As needed
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: B4 size, 1: LTR size
0
COPIER> OPTION> USER> B4-L-CNT
Switching of DADF + Reader type
To switch the type of DADF + Reader to a different type.
At installation
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: DADF (reverse model) + Reader, 1: DADF (1-path model) + Reader
0
Set event skipping at continuous PDL job
To set event skipping at continuous PDL job.
During continuous operation, processing performance may be decreased due to other events
generated by the event in operation. In this case, decrease of processing performance can be
prevented by skipping the amount of event.
Processing performance: No event skipping < Subject of skipping 1
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: No event skipping, 1: Subject of skipping 1
1
Allow access from address book mntc tool
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to accept import from the address book maintenance tool.
When executing import from the address book maintenance tool
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Address book maintenance tool: Tool provided from CMJ.
764
8. Service Mode