Canon imageRUNNER ADVANCE 4551i Service Manual page 807

COPIER > OPTION > ACC
MIN-PRC 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
MAX-PRC 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
MIC-TUN 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Set of Coin Manager minimum price
To set the minimum amount to be handled with Coin Manager.
Enter 10 when specifying 10 Japanese yen as the minimum amount to be handled with the Coin
Manager that supports Japanese yen.
In the case to specify 1 to 4 (Euro/Pound/Swiss Franc/Dollar) by going through the following:
COPIER> OPTION> ACC > UNIT-PRC, entry is in fractional unit. Entry of 50 indicates 50 cents
($ 0.50).
At installation of Coin Manager
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
This mode is enabled when selecting 4 for the following: COPIER> OPTION> ACC> COIN.
0 to 9999
10
COPIER> OPTION> ACC> COIN, UNIT-PRC
When a value smaller than the minimum amount is entered in Settings/Registration menu as the
charging amount, it causes an error.
Set of Coin Manager maximum price
To set the maximum amount to be handled with Coin Manager.
Enter 8800 when specifying 8800 Japanese yen as the maximum amount to be handled with the
Coin Manager that supports Japanese yen.
At installation of Coin Manager
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
This mode is enabled when selecting 4 for the following: COPIER> OPTION> ACC> COIN.
0 to 9999
8800
COPIER> OPTION> ACC> COIN, UNIT-PRC
When a value larger than the maximum amount is entered in Settings/Registration menu as the
charging amount, it causes an error.
Manual adj of voice recognize microphone
To manually adjust the voice receiving level (sensitivity) of the connected voice recognition
microphone.
Microphone sensitivity is automatically tuned in Settings/Registration menu; however, adjust it
manually as needed.
When the sensitivity of microphone is not improved by auto tuning
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 255
128
Preferences> Accessibility> Voice Navigation Settings> Tune Microphone
794
8. Service Mode