Canon imageRUNNER ADVANCE 4551i Service Manual page 986

Inner 2Way Tray-L1
Checking Before Installation
■ Check Items when Turning OFF the
Main Power
Check that the main power switch is OFF.
1. Turn OFF the main power switch of the Host Machine.
2. Be sure that control panel display and main power lamp
are both turned OFF, and then disconnect the power
plug from the outlet.
■ Installation Outline Drawing
Checking the Contents
[1] Inner 2Way Tray x1
Installation Procedure
CAUTION:
Check that the main power switch is OFF and the
power plug is disconnected from the outlet.
1. Remove the Inner Cover (Upper/Lower).
• 2 Screws
2x
973
9. Installation