Canon imageRUNNER ADVANCE 4551i Service Manual page 385

No Service Mode
6 PAYLOAD Whether to discard customer information when obtaining data
7 FILE-CLR Delete packet data in the hard disk
8 SIMPFILT Whether to use the filter function
■ Enabling This Function
● Overview
Since network packet data includes customer information, this function is not available by default. To use this function, it needs
to be activated as a license option as well as service mode needs to be enabled.
When enabling this function, make sure to first explain it to the customer and obtain their approval.
● Procedure for Enabling This Function
The procedure for enabling this function is indicated below.
1. Enter a license in the following menu to enable network capture.
[ Settings/ Registration ] > [ Management Settings ] > [ License/ Other ] > [ Register License ]
2. Enable the setting (ON) in the following menu.
[ Settings/ Registration ] > [ Preferences ] > [ Network ] > [ Store Network Packet Log ]
3. Set "1" in the following service mode.
• (Level2) COPIER > Test > NET-CAP > CAPOFFON
Set "1" in the following service mode.
■ Initial Settings
● Overview
When the network capture function has been enabled/started, specify the initial settings before performing network capture.
● Procedure for Setting the Overwrite Function
1. Set "1" in the following service mode to enable this function.
• (Level2) COPIER > Test > NET-CAP > OVERWRIT
CAUTION:
When the HDD space becomes full after starting the capture, the oldest file is deleted and the captured data continues to
be saved; therefore, it is necessary to set "1: Overwrite" in advance.
The following shows the machine behavior when the HDD space reaches full.
• When the overwriting setting is ON
• The oldest packet file is deleted. The oldest file is determined by the last update time of the file (not by the date
and time attached to the file).
• When the HDD space reaches full during packet collection, the oldest file is deleted to continue collecting packet
data to the currently-stored file.
• CAPSTATE of capturing continues to be "RUNNING".
Description
372
6. Troubleshooting
Setting value
0: Do not discard, 1: Discard
-
0: Do not use, 1: Use