Canon imageRUNNER ADVANCE 4551i Service Manual page 799

COPIER > OPTION > USER
JA-SBOX 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-DFAX 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-REP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-FREP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-BOX 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Setting of linking with Advanced Box:SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the link with Advanced Box when iW SAM is enabled.
When 1 is set, linking with Advanced Box is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of direct fax transmission: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the direct fax transmission when iW SAM is enabled.
When 1 is set, the direct fax transmission is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of TX Report with image: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the TX Report with image when iW SAM is enabled.
When 1 is set, the TX Report with image is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of Fax TX Report with image: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the Fax TX Report with image when iW SAM is enabled.
When 1 is set, the Fax TX Report with image is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of Inbox document operation: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the operation for Inbox document at the time of iW SAM
When 1 is set, the Inbox document can be operated.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
786
8. Service Mode