Canon imageRUNNER ADVANCE 4551i Service Manual page 809

COPIER > OPTION > ACC
HCC-P 1
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CV-CSZ 1
■ INT-FACE
COPIER > OPTION > INT-FACE
NWCT-TM 2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Supplement/Memo
Amount of Change per
Unit
■ LCNS-TR
COPIER > OPTION > LCNS-TR
ST-SEND 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-SEND 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Setting of Cst3 paper size (HC-CST)
To set the paper size used in the High Capacity Cassette Pedestal.
1) Enter the setting value, and then press OK key.
2) Adjust the Guide Plate position.
0 to 1
0: A4, 1: LTR
It differs according to the location.
[For customization]
Timeout setting of network connection
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the time to keep network connection between this machine and the PC application (keep-
alive setting).
As the value is incremented by 1, the time is increased by 1 minute.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 5
min
5
Expected PC application: Network print application, E-mail function, cascade copy, MEAP network
application, etc.
1
Installation state dspl of SEND function
To display installation state of SEND function when transfer is disabled.
When checking whether SEND function is installed
1) Select ST-SEND.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-SEND.
When operation finished normally: OK!
1
Trns license key dspl of SEND function
To display transfer license key to use SEND function when transfer is disabled.
- When replacing HDD
- When replacing the device
1) Select ST-SEND.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-SEND.
24 digits
796
8. Service Mode