Canon imageRUNNER ADVANCE 4551i Service Manual page 948

Hide thumbs Also See for imageRUNNER ADVANCE 4551i:

Table of Contents

5. Install the Connector Cover.

• 1 Screw (W Sems; M3x8)

6. Connect the Power Plug, and then install the Plug

Cover (120V only).

• 1 Screw (TP; M3x6)

7. After installing the optional heater, turn ON the

Heater Switch.

Installation Procedure (When

the Cassette Heater PCB as

standard is not installed)

Check that the main power switch is OFF and the

power plug is disconnected from the outlet.

■ Preparation of the Host Machine

1. Remove the Plug Cover (120V only), and then

disconnect the Power Plug.

2. Remove the Connector Cover.

3. When the Cassette Pedestal is installed, disconnect

the Connectors.

• 3 Connectors

9. Installation

Troubleshooting