Canon imageRUNNER ADVANCE 4551i Service Manual page 987

2. Install the Inner 2Way Tray as shown in the figure.
CAUTION:
Confirm that an inner 2Way tray is inserted in plug hole
or Tray leg precisely.
3. Install the Inner Cover (Upper).
• 2 Screws (RS Tightening; M3x8)
2x
4. Insert a power supply plug in an outlet.
Checking after Installation
■ Disposal Parts Check
Following disposal parts are remained after installation
procedure.
[1] Inner Cover (Lower) 1pc.
■ Operation Checks
1. Turn on the main power switch.
2. Enter in the service mode.
COPIER>OPTION>ACC>IN-TRAY
3. Register "1".
4. Turn OFF and then ON the main power.
5. Select copy to the Tray B, and perform test copy.
6. Check that a copy is delivered to the Inner 2way Tray.
7. Set the tray in accordance with user's request.
974
9. Installation