Canon imageRUNNER ADVANCE 4551i Service Manual page 981

10. Install the Plug Cover.
• 1 Screw (Binding (black); M4x4)
1x
Checking After Installation
■ Disposal Parts
Following disposal parts are remained after the installation
procedure.
[1] Cable Protection Bushing
[2] Face Seal
[3] Removed face cover
[4] Power Supply Label
[5] Wire Saddle (White)
Binding (black); M4x4
1pc.
2pcs.
2pcs.
1pc.
1pc.
11. Affix the Power Supply Label as shown in the figure.
12. Connect the power plug to the outlet.
13. Turn ON the main power switch of the host machine.
968
9. Installation