Canon imageRUNNER ADVANCE 4551i Service Manual page 816

COPIER > OPTION > LCNS-TR
ST-AMS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-AMS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-ERDS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
TR-ERDS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Supplement/Memo
ST-PS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Install state dspl of Access Mngm System
To display installation state of Access Management System when disabling and then transferring
the license.
When checking whether Access Management System is installed
1) Select ST-AMS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-AMS.
When operation finished normally: OK!
According to the setting at shipment
Trns lcns key dspl of Access Mngm System
To display transfer license key to use Access Management System when disabling and then
transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-AMS.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-AMS.
24 digits
Install state dspl: E-RDS 3rd Pty Expnsn
To display installation state of E-RDS non-Canon-made extension function when disabling and
then transferring the license.
When checking whether E-RDS non-Canon-made extension function is installed
1) Select ST-ERDS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-ERDS.
When operation finished normally: OK!
According to the setting at shipment
Monitoring service function: A function to send charge counter to the non-Canon-made charge
server.
Trns lcns key dspl: E-RDS 3rd Pty Expnsn
To display transfer license key to use E-RDS non-Canon-made extension function when disabling
and then transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-ERDS.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-ERDS.
24 digits
Monitoring service function: A function to send charge counter to the non-Canon-made charge
server.
Install state display of PS function
To display installation state of PS function when disabling and then transferring the license.
When checking whether PS function is installed
1) Select ST-PS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PS.
When operation finished normally: OK!
According to the setting at shipment
803
8. Service Mode