Canon imageRUNNER ADVANCE 4551i Service Manual page 850

COPIER > COUNTER > DRBL-2
FIN-STPR 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Amount of Change per
Unit
PUNCH 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Amount of Change per
Unit
TRY-TQLM 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Amount of Change per
Unit
DL-STC 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Amount of Change per
Unit
Stapler parts counter:Fin-J1/Y1
Staple Unit
1st line: Total counter value from the previous replacement
2nd line: Estimated life
When checking the consumption level of parts/replacing the parts
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
time
1
Punch unit parts counter:Fin-J1/Y1
Punch Unit
1st line: total counter value from the previous replacement
2nd line: estimated life
When checking the consumption level of parts or replacing the parts.
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
time
1
Tray Torq Limt pts cntr: Fin-Y1
Stack Tray Torque Limiter
1st line: Total counter value from the previous replacement
2nd line: Estimated life
When checking the consumption level of parts/replacing the parts
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
sheet
1
Stk Tr Dvry Ass'y Sttc Eliminator:Fin-Y1
Stack Tray Delivery Assembly Static Eliminator
1st line: Total counter value from the previous replacement
2nd line: Estimated life
When checking the consumption level of parts/replacing the parts
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
sheet
1
837
8. Service Mode