Canon imageRUNNER ADVANCE 4551i Service Manual page 773

COPIER > OPTION > IMG-FIX
TMP-TBL6 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TMP-TBL7 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
RAG-CONT 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
TMP-TBL8 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set fix ctrl temp table:Envlp/Crd/S-Crd
To change the fixing control temperature in the envelope mode, postcard mode and S-postcard
mode
When the poor fixing, paper slip or paper curl occurs in the envelope mode, postcard mode and
S-postcard mode
Enter the setting value, and then press OK key.
(Fixing grade priority)
0 to 2: +15 deg C
3 to 6: +12 to +3 deg C (3 deg C unit)
7: OFF
8 to 11: -3 to -12 deg C (3 deg C unit)
12 to 14: -15 deg C
(Productivity priority)
7
Set fix control temp table:Pln 2/Cst,MP
To change the fixing control temperature in the plain paper 2 mode at the Cassette feeding of the
25/35/45/51 cpm machine and the Multi-Purpose Tray feeding of the 25 cpm machine.
When the poor fixing, paper slip or paper curl occurs in the plain paper 2 mode
Enter the setting value, and then press OK key.
(Fixing grade priority)
0 to 2: +15 deg C
3 to 6: +12 to +3 deg C (3 deg C unit)
7: OFF
8 to 11: -3 to -12 deg C (3 deg C unit)
12 to 14: -15 deg C
(Productivity priority)
7
Set fix smeared image ctrl mode level
To set level of the mode (skipping) to control smeared image caused by fixing area.
When a smeared image occurs
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Set RAG-SW to 1 to 3 to enable skipping.
0 to 3
0: No skipping, 1: Small skipping, 2: Medium skipping, 3: Large skipping
2
COPIER> OPTION> IMG-FIX> RAG-SW
When this mode is ineffective, use COPIER> ADJUST> DEVELOP> DE-OFS together.
Set fixing ctrl temp table:transparency
To change the fixing control temperature in the transparency mode
When the poor fixing, paper slip or paper curl occurs in the transparency mode
Enter the setting value, and then press OK key.
(Fixing grade priority)
0 to 2: +15 deg C
3 to 6: +12 to +3 deg C (3 deg C unit)
7: OFF
8 to 11: -3 to -12 deg C (3 deg C unit)
12 to 14: -15 deg C
(Productivity priority)
7
760
8. Service Mode