Canon imageRUNNER ADVANCE 4551i Service Manual page 627

COPIER > DISPLAY > CST-STS
DK1-HADV 2
Amount of Change per
Unit
■ HV-STS
COPIER > DISPLAY > HV-STS
PRIMARY 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Amount of Change per
Unit
TR 1
Detail
Use Case
Adj/Set/Operate Method
Unit
Amount of Change per
Unit
BIAS 1
Detail
Use Case
Adj/Set/Operate Method
Unit
Amount of Change per
Unit
TR-V 1
Detail
Use Case
Adj/Set/Operate Method
Unit
Amount of Change per
Unit
For R&D
1
Display of primary charging current
To display the current that is applied to the Primacy Charging Assembly at the latest.
When checking ON/OFF of potential control
N/A (Display only)
0 to 4000
μA
1
Dspl of transfer current:Plain, 1st side
To display the current that is applied to plain paper (1st side) in the Pre-transfer Charging Assembly
at the latest.
For checking
N/A (Display only)
μA
1
Dspl of developing DC bias setting value
To display the setting value of developing DC bias.
For checking
N/A (Display only)
V
1
Display of transfer voltage
To display the voltage in the Pre-transfer Charging Assembly at the latest.
For checking
N/A (Display only)
V
1
614
8. Service Mode