Canon imageRUNNER ADVANCE 4551i Service Manual page 833

■ NET-CAP
COPIER > TEST > NET-CAP
CAPOFFON 2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
STT-STP 2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
CAPSTATE 2
Detail
Adj/Set/Operate Method
Related Service Mode
Additional Functions
Mode
PONSTART 2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
OVERWRIT 2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
ON/OFF of NetCap function
To set ON/OFF of network packet capture function.
Enter the setting value, and then press OK key.
0 to 1
0: OFF, 1: ON
0
COPIER> TEST> NET-CAP
Store Network Packet Log
Start and stop of network packet capture
To start and stop network packet capture.
Enter the setting value, and then press OK key.
0 to 1
0: Stop, 1: Start
0
COPIER> TEST> NET-CAP
Store Network Packet Log
State display of network packet capture
To display the state of network packet capture.
N/A (Display only)
COPIER> TEST> NET-CAP
Store Network Packet Log
Set network packet capture start timing
To set whether to perform network packet capture from power-on.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
COPIER> TEST> NET-CAP
Store Network Packet Log
Setting of NetCap data overwriting
To set whether to finish network capturing or overwrite when HDD becomes full.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: No overwriting (finish network packet capture), 1: Overwriting
1
COPIER> TEST> NET-CAP
Store Network Packet Log
820
8. Service Mode