Canon imageRUNNER ADVANCE 4551i Service Manual page 704

COPIER > FUNCTION > INSTALL
COM-TEST 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
Supplement/Memo
COM-LOG 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
Supplement/Memo
RGW-ADR 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
CNT-DATE 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
Dspl connect result w/ Sales Co's server
To display the result of the connection test with the sales company's server.
When using Embedded-RDS
Select the item, and then press OK key.
Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and RGW-ADR as a set.
During operation: ACTIVE, When connection is completed: OK, When connection is failed: NG
COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-LOG, RGW-ADR
Embedded-RDS: Function to send device information such as the device counter, failure, and
consumables to the sales company's server via SOAP protocol
Dspl connect error w/ Sales Co's server
To display error information when the connection with the sales company's server failed.
When using Embedded-RDS
Display only
Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and RGW-ADR as a set.
Year, date, time, error code, error detail information (maximum 128 characters)
COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-TEST, RGW-ADR
Embedded-RDS: Function to send device information such as the device counter, failure, and
consumables to the sales company's server via SOAP protocol
URL setting of Sales Company's server
To set the URL of the sales company's server to be used for Embedded-RDS.
When using Embedded-RDS
1) Select the URL.
2) Enter the URL, and then press OK key.
2) Turn OFF/ON the main power switch.
- Do not use Shift-JIS character strings.
- Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and RGW-ADR as a set.
URL
https://b01.ugwdevice.net/ugw/agentif010
COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-TEST, COM-LOG
Embedded-RDS: Function to send device information such as the device counter, failure, and
consumables to the sales company's server via SOAP protocol
Set counter send start date to SC server
To set the year, month, date, hour and minute to send counter information to the sales company's
server.
This is displayed only when the Embedded-RDS third-party extended function is available.
When the Embedded-RDS third-party expanded function is available
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
YYYYMMDDHHMM (12 digits)
YYYY: Year, MM: Month, DD: Date, HH: Hour, MM: Minute
000000000000
Embedded-RDS: Function to send device information such as the device counter, failure, and
consumables to the sales company's server via SOAP protocol
691
8. Service Mode