Send Config Key; View Config Key; Operational Functions; Special Feature Key - ABB Platinum standard Series Product Instruction

Send Config Key

View Config Key

OPERATIONAL FUNCTIONS

Special Feature Key

WBPEEUI110504A0
in the Type STT terminal memory unless YES is chosen when
STORE THIS CONFIGURATION? appears on the Type STT ter-
minal display.
The SEND CONFIG key allows selection of a configuration from
the terminal memory to be sent to the transmitter (refer to the
Type STT Smart Transmitter Terminal Instruction).
Pressing the VIEW CONFIG key allows the parameters of the
working configuration to be viewed, but not changed (refer to
the Type STT Smart Transmitter Terminal Instruction).
Operational functions for the Type PTSD pressure transmitter
are performed by using the SPECIAL FEATURE, OUTPUT,
STATUS, and F1 keys on the Type STT terminal.
Press the SPECIAL FEATURE key on the Type STT terminal
and follow the procedures in the Type STT Smart Transmit-
ter Terminal Instruction.

FIX OUTPUT/CANCEL FIX OUTPUT

For system troubleshooting purposes, the Type PTSD pressure
transmitter output can be set to a constant, specified as a per-
cent of the four to 20-milliampere signal. Press the SPECIAL
FEATURE key and select FIX OUTPUT from the menu of the
Type STT terminal (refer to the Type STT Smart Transmitter
Terminal Instruction). To cancel FIX OUTPUT, press the SPE-
CIAL FEATURE key, then select CANCEL FIX OUTPUT.

LOCAL LCD SETUP

The local LCD can be programmed to display output in percent
and user-defined secondary engineering units, input in pri-
mary engineering units, cell temperature, and transmitter ID
tag.

STANDARD CONFIGURATION

This function allows the configuration of the transmitter to be
changed back to the original configuration entered at the
factory.
OPERATING PROCEDURES
OPERATIONAL FUNCTIONS
5 - 5