Assembly Replacement Procedure - Keysight P937 A Series Service Manual

Replaceable Parts Listings

Assembly Replacement Procedure

Assembly Replacement Procedure
The following steps describe how to replace an assembly in the analyzer.
Step 1. Identify the faulty group. Begin with
with the appropriate troubleshooting chapter that identifies the faulty
assembly.
Step 2. Order a replacement assembly. Refer to this chapter for part numbers and
ordering information.
Step 3. Replace the faulty assembly and determine what adjustments and
performance tests are necessary. Refer to
Replacement Procedures."
Step 4. Perform the
on page
Keysight P937xA PXIe Service Guide
"The Operator's Check" on page 3-33
3-36.
Chapter 3 "Troubleshooting"
Chapter 5, "Removal and
and "System Verification"
Follow up
55