Assembly Replacement Procedure - Keysight N9912A Service Manual

Replaceable Parts

Assembly Replacement Procedure

Assembly Replacement Procedure
The following steps describe how to replace an assembly in the analyzer.
Step 1. Identify the faulty group. Begin with
with the appropriate troubleshooting chapter that identifies the faulty
assembly.
Step 2. Order a replacement assembly. Refer to this chapter for part numbers and
ordering information.
Step 3. Replace the faulty assembly and determine what adjustments and
performance tests are necessary. Refer to
Replacement Procedures."
Step 4. Perform the necessary adjustments. Refer to
Adjustments."
Step 5. Perform the necessary performance tests. Refer to
Adjustments."
Keysight N9912A Service Guide
Chapter 4, "Troubleshooting."
Chapter 7, "Repair and
Chapter 3, "Tests and
Chapter 3, "Tests and
Follow up
6-3