Cli Sessions; Cna Test Plugs - Avaya G450 Cli Reference Manual

CLI sessions

Table 11: CLI sessions commands
Command
exit
reset
retstatus
set logout
show logout
tech
tree

CNA test plugs

Table 12: CNA test plugs CLI commands
Root level command
cna testplug
Description
Exit the current context. If you are in the root context,
the exit command logs you out of the system.
Reset a specified system resource
Show whether or not the last CLI command you
performed was successful
Set the number of minutes until the system
automatically disconnects an idle session
Display the amount of time in minutes the terminal
remains idle before timing out. If the logout value is 0,
there is no timeout limit.
Enter tech mode, where additional tech-related
commands are available
Display an alphabetical list of commands that are
available at your current location in the CLI hierarchy
First level command
clear counters (CNA
test plugs)
control-port
Description
Enter the CNA test plug configuration
context
Clear the CNA test plug counters
Set or reset the UDP port on which the
CNA test plug listens for test requests from
schedulers
Issue 1 January 2008
1 of 2
51