Advertisement
Feeding Different-size Originals Together in the
Feeder
(Different Size Originals)
This function enables you to copy different-size originals with the same width or different-size origi-
nals with different widths, together in one group.
IMPORTANT
• In the Different Size Originals mode, combined use with the Book 2-sided, Two-page Separation, Book-
let, Image Combination, Image Separation, and Image Repeat modes cannot be set.
• All originals placed together in the feeder must be the same weight (paper type).
• Align the top edge of the originals with the back edge of the feeder when placing different-width originals.
• Set the different-size originals with the combinations as follows. Other combinations may damage the
originals.
- 11''x17'' and LGL, LTR and LGL, LTR and LTRR.
• When you place different-width originals, the originals may slightly be moved when fed to the platen glass,
and as a result, the images may be scanned and copied slantwise.
• You cannot select the Shift mode when you set the Automatic Paper Selection in combination with the Dif-
ferent Size Originals mode.
• You cannot set the Staple mode when placing different-width originals.
• The Auto Orientation will not be performed when you set the Different Size Originals mode.
• When combined with 1to2-Sided originals, two-sided copying cannot be performed. The different-sized
originals will be printed as one-sided copies on their respective sizes.
1
Place your original in the feeder and press the
[Special Features] key.
NOTE
• When Auto Collate is set to "On", the Collate mode
or the Offset Collate mode is automatically set at
the point when you place the originals in the
feeder. (See "Setting Automatic Collate On/ Off,"
on p. 6-37.)
2
Press the [Different Size Originals] key.
Feeding Different-size Originals Together in the Feeder (Different Size Originals)
Image Separation
Different Size Originals
3-43
Advertisement
Chapters
