Different Size Originals - Canon imageRUNNER 2320 Copying Manual

Different Size Originals

The Different Size Originals mode enables you to copy differently sized originals
together.
IMPORTANT
2
• To use the Different Size Original mode, the optional Feeder (DADF-P2) must be
attached to the machine.
• Make sure that the differently sized originals are of the same weight (paper type).
• If originals with different widths are placed in the feeder, set the differently sized originals
in the following combinations. Other combinations may damage the originals.
- A4R and A5 or A3 and A4
• Align the top edge of the originals with the back edge of the feeder if you are placing
originals with different widths. ("Width" refers to the vertical measurement of the paper
from the front of the machine to the back of the machine when the paper is placed in the
feeder.)
• If you place originals with different widths into the feeder, the originals may move slightly
when fed to the platen glass. As a result, the images may be scanned and copied as
slanted.
• If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
• If the Different Size Originals mode is set in combination with the Automatic Paper
Selection mode, Auto Orientation is not performed.
• The Different Size Originals mode cannot be used with the 2-Page Separation, Image
Combination, Original Frame Erase, Book Frame Erase, Binding Erase, or Book to
2-Sided mode.
NOTE
If the Different Size Originals mode is used with the 1 to 2-Sided mode and the originals
for the front and back sides of a two-sided copy are different in size, the copies are
output as one-sided copies on paper of their respective sizes.
1
Place your originals into the feeder.
2
Press
The Different Size Originals menu appears.
2-18

Different Size Originals

(Different Size Originals).