Commissioning
ü Requirement: Opening the user interface of WAGO Webserver I/O Field requires that
product's IP address is configured and known.
•
Proceed as follows:
Enter the following text in the address bar of your Web browser to address the prod-
uct:
http://<IP-address-according-to-configuration>
e.g., http://192.168.10.2.
ð The Dashboard of WAGO Webserver I/O Field appears. You can now use the func-
tions described below.
10.3.1.2 WAGO Webserver I/O Field User Interface
When the user interface of WAGO Webserver I/O Field opens, the main page of the
Dashboard appears first.
It shows the following product information:
Section
Device information
Device version
Maintenance information
IOL device information
10.3.1.2.1 Maintenance Information
The maintenance information includes information in text form that the user can set, e.g.,
the product name, installation location and date, contact information, description and date
of the last and next product service. The texts can be edited by selecting Settings from
the menu on the Maintenance information tab.
84
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Figure 11: Dashboard Menu Item, Main Page
Information Displayed
Product data and WAGO contact information
Information on the product version:
Hardware name and version number
Software name and version number
Website version number
Maintenance information in text form
Advanced module and port information (measurement data on the mod-
ule state)
765-4501/0100-0000
Table 52: Data on the "Dashboard" Page