Snmp-Server Trap Authentication - D-Link xStack DWS-3200 Series Cli Manual

SNMP Commands

snmp-server trap authentication

snmp-server trap authentication
The snmp-server trap authentication Global Configuration mode command enables the device to send SNMP
traps when authentication fails. To disable SNMP failed authentication traps, use the no form of this command.
Syntax
snmp-server trap authentication
no snmp-server trap authentication
Default Configuration
SNMP failed authentication traps are enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables SNMP failed authentication traps.
Console(config)# snmp-server trap authentication
Page 288