Logging Onto The Switch Console By Registered Users; Create/Modify User Accounts - D-Link DES-3225G Series User Manual

24-port NWay Ethernet Switch User's Guide
Figure 6-3. Save Changes screen
After the settings have been saved to NV-RAM, they will become the default settings for the switch, and they
will be used by the switch every time it is powered on, reset or rebooted. The only exception to this is a factory
reset, which will clear all settings and restore them to their initial values listed in Appendix D, which were
present when the switch was purchased.

Logging Onto The Switch Console By Registered Users

To log in once you have created a registered user,
1. Type in your Username and press <Enter>.
2. Type in your Password and press <Enter>.
3. The main menu screen will be displayed based on your Administrator or Normal User access level or
privilege.

Create/Modify User Accounts

To add or change your user password:
Choose Users Accounts Management from the main menu. The following User Accounts
Management menu appears:
40 Using the Console Interface