logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full capacity.
Otherwise when the log file reaches full capacity, logging stops.
Default
Format
Mode
no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop when
the log file capacity is full.
Format
Mode
logging cli-command
This command enables the CLI command logging feature, which enables the D-Link Unified
Wired/Wireless Access System software to log all CLI commands issued on the system.
Default
Format
Mode
no logging cli-command
This command disables the CLI command Logging feature.
Format
Mode
logging console
This command enables logging to the console. You can specify the
either an integer from 0 to 7 or symbolically through one of the following keywords:
(0),
(1),
alert
critical
Default
Format
Mode
no logging console
This command disables logging to the console.
Format
Mode
enabled
logging buffered wrap
Privileged EXEC
no logging buffered wrap
Privileged EXEC
enabled
logging cli-command
Global Config
no logging cli-command
Global Config
(2),
(3),
error
warning
disabled; critical when enabled
logging console [severitylevel]
Global Config
no logging console
Global Config
<severitylevel>
(4),
(5),
(6), or
notice
info
Logging Commands
6 Utility Commands
value as
emergency
(7).
debug
269