Spare Parts - Waters SYNAPT G2 Operator's, Overview And Maintenance Manual

Maintenance schedule (continued)
Procedure
Clean or replace the corona
pin (APCI and ESCi modes).
Replace the APCI probe
heater.
Replace the ion block heater
cartridge.
Replace the source assembly
seals.
Replace the mass
spectrometer air filters.
Replace the IntelliStart
Fluidics tubing.

Spare parts

Replace only the parts mentioned in this document. For spare parts details,
see the Waters Quality Parts Locator on the Waters Web site's
Services/Support page.
5-4 Maintenance Procedures
Frequency
When the corona pin is
corroded or black, or
the sensitivity
decreases to
unacceptable levels.
If the heater fails to
heat the probe.
If the heater fails to
heat the ion block.
Annually.
Annually.
In the event of
blockage in the tubing
connections between
the IntelliStart
Fluidics system
components.
For information...
See page 5-83.
See page 5-84.
See page 5-87.
See page 5-91.
See page 5-95.
See page 5-98.