Replacing The Apci Probe Heater; Removing The Apci Probe Heater - Waters SYNAPT G2 Operator's, Overview And Maintenance Manual

Replacing the APCI probe heater

Replace the APCI probe heater it fails to heat the probe.

Removing the APCI probe heater

Required materials
Chemical-resistant, powder-free gloves
To remove the APCI probe heater
1. Remove the probe from the source (see
5-84 Maintenance Procedures
The probe and source components can be contaminated
Warning:
with biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while performing this
procedure.
page 3-18).
Probe heater