Waters SYNAPT G2 Operator's, Overview And Maintenance Manual page 184

9. Using a 1/32-inch, Valco component fitting assembly, connect the red,
1/32-inch, 60-mm, PEEK tubing between the flow sensor and the
grounded union, where you use a short "finger tight" nut and 1/32-inch
ferrule.
A
B
C
Short "finger tight" nut and 1/32-inch ferrule
5-106 Maintenance Procedures
Grounded union
A
B
C
B C
A
Wa ters
C
A B