Waters SYNAPT G2 Operator's, Overview And Maintenance Manual page 103

Caution:
always place it on its flanged base.
4. Rotate and lift the tool and collar to remove the sample cone from the
cone gas nozzle.
Cone gas nozzle
5. Remove the sample cone from the combined 2.5-mm Allen wrench and
cone extraction tool.
6. Replace the combined 2.5-mm Allen wrench and cone extraction tool in
its storage location on the source adaptor housing.
7. Remove the O-ring from the sample cone.
Cone gas nozzle
Cone gas nozzle
handle
The sample cone is fragile. Never place it on its tip;
Cleaning the sampling cone assembly
Sample cone
Sample cone
O-ring
5-25