Table of Contents
Advertisement
2.
Remove the extraction cone from the ion block.
3.
Remove the extraction cone handle insulator from the extraction cone
handle.
Cleaning the extraction cone
Required materials
•
Chemical-resistant, powder-free gloves.
•
Appropriately sized glass vessel in which to completely immerse the
extraction cone when cleaning. Use only glassware not previously
cleaned with surfactants.
•
HPLC-grade (or better) methanol.
•
HPLC-grade (or better) water.
•
Formic acid.
5-34
Maintenance Procedures
Caution:
• Take great care not to damage the extraction cone aperture
when removing the extraction cone from the ion block.
• The extraction cone is fragile. Never place it on its tip; always
place it on its flanged base.
Extraction cone aperture
- Quick Links:
- Calibrating
Hide quick links:
Advertisement
Table of Contents
