Waters SYNAPT G2 Operator's, Overview And Maintenance Manual page 205

B
External Connections
This appendix describes the mass spectrometer's external connections.
Contents
Topic
Mass spectrometer external wiring and vacuum connections
Connecting the Edwards oil-free roughing pump
Connecting to the nitrogen gas supply
Connecting to the collision cell gas supply
Connecting the nitrogen exhaust line
Connecting the liquid waste line
Input/output signal connectors
Connecting the workstation (system without ACQUITY UPLC) B-21
Connecting Ethernet cables (system with ACQUITY UPLC)
Connecting to the electricity source
Connecting the NanoLockSpray source camera
The mass spectrometer is heavy. To avoid injury, use
Warning:
suitable machinery and the supplied harness to lift it.
Caution:
• Contact Waters Technical Service before moving the
instrument.
• If you must transport the mass spectrometer, or remove it from
service, contact Waters Technical Service for recommended
cleaning, flushing, and packaging procedures.
See "Troubleshooting using Connections Insight" on page 5-5.
Page
B-2
B-3
B-7
B-9
B-10
B-13
B-15
B-21
B-22
B-23
B-1