(WiFi antenna) while it is being installed and operated. • The device is intended for indoor use only. • Device maintenance has to be done exclusively by a Waters representative. • If the device is used in a manner not speci ed by the manufacturer, the protection provided by the device may be impaired.
It is the user’s responsibility to become familiar with all available information concerning the correct use, care and limitations of these products. If you are uncertain about the correct use or limitations of the products, contact Waters service and support. The manufacturer, the distributor and their respective owners, employees, agents and representatives are not responsible or liable for errors or omissions.
[ CARE AND USE MANUAL ] Getting started Before If you do not have a OneLab account, please create one by going to: you begin https://onelab.andrewalliance.com/signup Wait for the LED indicator to Plug your Shaker+ turn blue and blink. into a power source. The device will automatically start up.
Page 5
[ CARE AND USE MANUAL ] Feel free to contact the Waters Chat with our support team Send us an email to support team directly in OneLab aa_support@waters.com We reply within 1 business day Operations 1. Shaking Drag required labware and enter parameters for shaking...
[ CARE AND USE MANUAL ] Multiple connected devices Technical data installation Labware Check the OneLab Domino compatible Catalog at andrewalliance.com/ domino-catalog Mixing frequency • Tube: 200 to 2000 rpm • Microplate: 200 to 3000 rpm (The maximum speed may di er according to the type of used labware) Mixing orbit...
[ CARE AND USE MANUAL ] Unit end of life When a unit reaches the end of its useful life, contact Andrew Alliance for directions and information on the end-of-life policy. This is in accordance with the European Union Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
Need help?
Do you have a question about the Shaker+ and is the answer not in the manual?
Questions and answers