Replacing the IonSABRE II probe heater
Replace the IonSABRE II probe heater if it fails to heat the probe.
Removing the IonSABRE II probe heater
Required materials
Chemical-resistant, powder-free gloves
To remove the IonSABRE II probe heater:
1.
Remove the probe from the source (see
4-98
Maintenance Procedures
The probe and source components can be contaminated
Warning:
with biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while performing this
procedure.
page
3-10).
Probe heater