Connecting The Heater/Cooler Power Cord And Temperature Probe - Waters 717plus Operator's Manual

Temperature
Probe
Connector
2
Figure 2-13 Connecting the Heater/Cooler Power Cord and Temperature Probe
6. Push the temperature probe through the grommet located on the floor of the unit
behind the carousel drive
stop.
46 Installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Heater/Cooler
Power Connector
(J20)
Opening For
Heater/Cooler
Power Cable
(Figure 2-14). Push the probe down until it reaches the