CRANKCASE/TRANSMISSION/KICKSTARTER
Apply clean engine oil to the shift fork shafts, and insert
SHIFT FORK SHAFTS
them through the shift forks into the right crankcase.
Rotate the mainshaft by hand to see the gears rotate freely.
Assemble the crankcase.
Carefully install the balancer shaft aligning with its groove
with the groove given in the crankshaft.
Align
CRANKCASE ASSEMBLY
PASSAGES
Clean the oil passages of crankcase using the compressed
air.
Clean the left and right crankcase mating surface
thoroughly, being careful not to damage them and check
for damage.
Apply a light but through coating of sealant to all crankcase
mating surface except the oil passage area.
11-17