Cylinder Head Removal - Honda CB HORNET 160R 2015 Shop Manual

CYLINDER HEAD/VALVES

CYLINDER HEAD REMOVAL

Remove the following :
– Exhaust pipe (page 2-8)
– Fuel tank (page 2-4)
– Camshaft (page 7-6)
Remove bolts (2 nos.) of the intake manifold from cylinder
head.
Remove flange bolts (2 nos.).
Loosen the nut (4 nos.) and loosen the stud bolt (4 nos.).
Remove the stud bolts, nuts and washers (4 nos. each).
Place a shop towel over the cylinder head opening to avoid
the washers to fall down into the crankcase.
7-10
CAUTION
!
BOLTS
STUD BOLTS/NUTS
FLANGE
BOLTS
STUD BOLTS/
NUTS