Honda CB HORNET 160R 2015 Shop Manual page 204

FRONT WHEEL/SUSPENSION/STEERING
Apply silicon grease to the throttle cable end.
Connect the throttle cable end to the handlebar.
Install the right handlebar switch housing, while aligning
its locating pin with the hole on the handlebar.
Install and tighten the throttle housing screws.
Install the starter switch housing on the handlebar while
aligning it's locating pin.
Install and tighten the starter switch housing screws.
12-8
THROTTLE CABLE
HANDLEBAR
Align
STARTER SWITCH
ASSEMBLY
Align
HOLDER
SCREWS
SCREWS