Honda CB HORNET 160R 2015 Shop Manual page 101

Install the plate, plate bolts and nuts.
Install the front engine hanger bolts and nuts.
Tighten the front and rear engine hanger nuts to the
specified torque.
TORQUE:
Front engine hanger nut : 45 N·m (4.5 kgf·m, 33 lbf·ft)
Rear engine hanger nut : 54 N.m (5.5 kgf.m, 37.6 lbf·ft)
Install the drive chain onto the drive sprocket.
Install the drive sprocket to the counter shaft.
Install the fixing plate.
Rotate the fixing plate, and align the holes in the fixing plate
with the bolts hole in the drive sprocket.
Tighten the drive sprocket fixing plate bolts (2 nos.) to the
specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the left crankcase rear cover and bracket.
ENGINE REMOVAL/INSTALLATION
FRONT ENGINE
HANGER BOLTS/NUTS
CHAIN
FIXING PLATE
CHAIN
FIXING PLATE
LEFT CRANKCASE
REAR COVER
BRACKET
BOLTS/ NUTS
PLATE
Align
DRIVE SPROCKET
BOLTS
DRIVE SPROCKET
6-5