Honda CB HORNET 160R 2015 Shop Manual page 148

CLUTCH/GEARSHIFT LINKAGE
INSTALLATION
Apply molybdenum oil solution to the entire surface of the
clutch outer guide, and install it onto the mainshaft .
Apply clean engine oil to the gear primary drive.
Install the oil pump driven gear.
Install the clutch outer and washer.
Coat the clutch discs with clean engine oil.
Assemble clutch disc A, disks B, clutch plates and pressure
plate onto clutch center by aligning "O" mark of clutch center
and pressure plate.
9-10
CLUTCH OUTER GUIDE
GEAR PRIMARY DRIVE
PRESSURE PLATE
DISC A
DISCS B
DISC A
CLUTCH
CENTER
CLUTCH OUTER
WASHER
PLATES
Align